| Product Availability |
|
| SCREW
MACHINE STOCK |
| COLD-FINISHED
ROD and BAR |
| EXTRUDED
ROD and BAR |
| HARD ALLOY SHAPES |
| ALLOY
AVAILABILITY:
|
|
| ISO
9002 Certified |
| TENNALUM
PLANT |
| JACKSON,
TENNESSEE |
|
|
|
|
| TEMPER
AVAILABILITY |
| 2011 |
2014 |
2017 |
2024 |
2219 |
4026 |
6033 |
|
-T3 |
|
-T4 |
|
-T451 |
|
-T6 |
|
-T651 |
|
-T8 |
|
|
|
|
|
|
|
|
-T3 |
|
-T4 |
|
-T351 |
|
-T3511 |
|
-T6 |
|
-T81 |
|
-T851 |
|
-T8511 |
|
|
-T31 |
|
-T3511 |
|
-T81 |
|
-T851 |
|
-T8511 |
|
|
|
|
|
|
|
|
|
| 6061 |
6262/6040 |
7049 |
7050 |
7068 |
7075 |
|
|
-T4 |
|
-T451 |
|
-T6 |
|
-T651 |
|
-T6511 |
|
|
|
|
|
|
|
|
|
-T6 |
|
-T6511 |
|
-T73 |
|
-T73511 |
|
-T74 |
|
-T74511 |
|
-T76 |
|
-T76511 |
|
|
-T73 |
|
-T73511 |
|
-T74 |
|
-T74511 |
|
-T76 |
|
-T76511 |
|
|
|
|
|
|
-T6 |
|
-T651 |
|
-T6511 |
|
-T76 |
|
-T76511 |
|
|
|
|
|
|
|
|
-T6 |
|
-T651 |
|
-T6511 |
|
-T73 |
|
-T7351 |
|
-T73511 |
|
-T76 |
|
-T76511 |
|
|
| 1 Additional alloy
temper subject to special inquiry. |
|
|
|
| ROUNDS (0.125"
- 8.750" Inclusive) AND
HEXES (0.250" -
3.000" Inclusive) |
Tempers
| Screw Machine Stock
is supplied in the tempers shown above for the alloy desired.
Non-stress-relieved tempers (-T4, -T6) are available in the
complete size range. Stress-relieved tempers (-TX51, -TX511)
are available from 0.300" to 8.000". |
|
|
Cold Finished - Rounds
| The maximum diameter of
2011-T3 and 2011-T8 is 3.5". |
| The maximum diameter of 6262-T8 and
6262-T9 is 3.5". |
|
Extrude Only - Rounds
| Sizes from 0.300" to
8.750" are available as extruded only. |
| Screw machine stock products in 2011
and 6262 alloys are not normally supplied as extrude only. |
|
| Lengths |
| Screw Machine Stock is
available in specific 12 foot length in sizes 0.125 in. to 4.0 in.
inclusive for rounds and 0.250" to 3.0" inclusive for
hexagons. |
| Other lengths available
up through 20 feet depending on alloy, temper and size. |
|
| Special Notes |
| Chamfer: 0.1875"
through 2.0" incl., supplied with one end chamfered. |
|
| SQUARES AND
RECTANGLES (0.125"
x Various - 6.000" x 8.000" incl.) |
Alloy
| The standard alloys
for rectangles are 2024 and 7075. |
|
|
Tempers
| Cold finished rectangular
bar is supplied in T351/T451/T651/T851 tempers, except under 0.500" in thickness is
normally T4/T6. Extruded rectangular bar is
supplied in T3511/T6511 tempers, except under 0.500"
in thickness is normally
T3/T6. |
| Other alloys and tempers
are available subject to special inquiry. |
|
Lengths
| Rectangular Bar is
furnished in standard 12' lengths. |
|
| PACKAGING |
| Standard items are packaged in 500 lb., 1000
lb., or 2000 lb. strapped bundles. Other packages subject to inquiry. |
|
